VAN DER ENDE Verti-Fan EC, Руководство пользователя

Страница: 15 / 28

Page 15 of 28
4.4 Installation of hose
The Verti-Fan is installed as follows; use Figure 7:
•
Cut the plastic hose (E) to size; the ideal height of the hose from the ground is about 400 mm
(When the option: the stainless steel ring (F) is used, the hose (E) needs to be cut 250 mm) ;
•
When using stainless steel ring (F):
o
Slide the ring (F) over the hose (E);
o
Fold 250 mm of the hose over the ring:
o
Fit the three retaining clips (G), so that the stainless steel ring (F) is secured to the
hose (E);
o
Place the mounting strip of the retainer (G) facing towards the inside of the hose;
•
Slide the other end of the hose over the underside of the mounting ring (I):
•
Place the hose clamp (D) around the mounting ring (C) and hose (E), and tighten;
•
The mounting ring (C) can now be clicked around the wind tunnel of the fan (A) by placing it over
the spacers which are attached to the mounting brackets (B);
•
Insert the plug into the power supply socket;
•
Bear in mind at this stage that the Verti-Fan must be visible from the connection point (the socket).
Figure 7 Mounting the plastic hose
1x plastic hose (E)
4x mounting brackets
+ spacer (B)
1x mounting ring (C)
1x stainless steel hose
clamp (D)
1x stainless steel ring/oval (F)
(optional)
3x retaining clip (G) (optional)
1x fan (A)