26
Please follow the steps to modify the zone attribute:
1.
Press: “
SET
”.
2.
Enter Code: “
888888
” (this is the default password).
3.
Select: “
Zone Attribute”
use the arrows
to find the option in the menu.
4.
Press: “
ENT
”.
5.
Enter: Zone Number you wish to modify “
XX
”.
6.
Select: Zone Type:
“2”
for Motion Zone,
“1”
for Perimeter Zone or
“0”
for Emergency Zone;
use the arrows
to choose.
7.
Press: “
ENT
”.
8.
Delete the old record by pressing the arrow
.
9.
Enter: Alarm Type Number (refer to Page. 24 to choose the number according to what
sensor are synchronized under the Zone Number you are modifying ).
10.
Press: “
ENT
”.
11.
Bypass Zone? Choose:
“YES”
of you wish to disable this Zone Number or
“NO”
if you wish
this Zone Number to remain enabled.
12.
Press: “
ENT
”.
13.
Enter Delay Set: Choose
“YES”
if you want this Zone Number to have a delay to trigger the
alarm system (you can change the delay time in the option: “
Entry Delay
” in the main menu)
or choose
“NO”
if you want this Zone Number to trigger the alarm system immediately if a
sensor goes off.
14.
Press: “
ENT
”.
15.
If you want to modify attributes in another Zone Number please follow again from Step 5 to
13.
16.
Done!
