14
4.
If the Siren was successfully synchronized to the system, the LED’s from the Siren will flash
few times, if not please repeat the process.
5.
Done!
Please follow the next steps to link the Outdoor Siren from the Alarm Host:
1.
Press: the green button on the backside of the Siren to turn it on.
2.
Press: the red button on the backside of the Siren to turn the device in learning mode (all
LED lights will turn to indicate that learning mode is activated).
3.
Activate the Alarm System by pressing the Emergency Button located on the left side of the
number 0 (zero), once the alarm has been triggered, disarm the system by pressing the
Disarm Button located on the right side of the 0 (zero) then Enter Code: “888888” then press:
“ ENT”.
4.
If the Siren was successfully synchronized to the system, the LED’s from the Siren will flash
few times, if not please repeat the process.
5.
Done!
8.
Indoor Siren:
How to install:
Once the indoor siren is linked to the system, Plug the siren in any socket of your home
and that’s all.
Note:
You will find a small black button on one side of the Siren; this button is used to turn the Siren
in learning mode.
There are two ways to link the Siren to the system: using the remote control or directly from the
alarm host.
