77
English
“DB Management”
Press the goto button to show the transponders of the satellite or to go back to
satellites’ list.
•
“Add transponder”: Press the red button to add a new transponder. Note: You
cannot save an existing transponder under the same satellite.
•
“Edit transponder”: Press the green button to edit the transponder. Note: You
cannot save an existing transponder under the same satellite.
•
“Delete transponder”: Press the yellow button to delete the transponder.
Press the OK button to confirm.
“Single Transponder Scan”:
Press the blue button to access the menu. After configuring the settings, press
the OK button to start scanning.
“Multi-Transponder Scan”:
Press the OK button to select transponders. Press the blue button to access the
menu. After configuring the settings, press the OK button to start scanning.
“Time”
Adjust the time settings:
1. Select the menu item.
2. Adjust the setting.
3. Press the OK button.
4. Press the exit button to exit the
menu.
“Time Offset”: Select “Auto” or
“Manual” to adjust the GMT offset.
“Country Region”: If “Time Offset” is
set to “Auto“, select a region.
“Time Zone”: If “Time Offset” is set to
“Manual“, select a time zone offset.
“Sleep”: Select “On” or “Off”.
Note: If the setting is set to “On”, the
device will go to sleep mode after
0-12 hours. Press the on/standby
button to exit the sleep mode.
“Option”
Adjust the option settings:
1. Select the menu item.
2. Adjust the setting.
3. Press the OK button.
4. Press the exit button to exit the
menu.
“OSD Language”: Select the OSD
language.
“Subtitle Language”: Select the
subtitle language.
“Audio Language”: Select the audio
language.
“Digital Audio”: Select the digital
audio output mode.
“System”
Adjust the system settings:
1. Select the menu item.
2. Adjust the setting.
3. Press the OK button.
4. Press the exit button to exit the
menu.
“Parental Guidance”: Restrict access to
channels that are unsuitable for
children. To lock the channel, enter
the password.
“Set Password”: Change the password
for locked programs. Enter the old
password, followed by the new
password. To confirm, enter the new
password again.
“Restore Factory Default”: Enter the
password and press the OK button to
return to the factory settings. All
channels and settings will be deleted.
“Information”: View information
regarding the model, the hardware
and the software.
“Software Update”:
•
Enable or disable the Over Air
Download (OAD) function.
•
Upgrade the software via USB.
“Recall List”:
•
Enable or disable the recall list
function.
“USB”
Adjust the USB settings:
1. Select the menu item.
2. Adjust the setting.
3. Press the OK button.
4. Press the exit button to exit the
menu.
“Multimedia”:
• Refer to the section “Multimedia”
on the next page.
“Photo Configure”:
• “Slide Time”: Set the slide show
interval.
• “Slide Mode”: Set the slide show
effect.
• “Aspect Ratio”: Display the photo
with its original aspect ratio.
• “Discard”: Display the photo in
full-screen mode.
“Movie Configure”:
• “Subtitle Specific”:
“Small“ / “Normal“ / “Big“: Display
subtitles in small mode, normal
mode or large mode.
• “Subtitle BG”:
- “White“ / “Transparent“ / “Gray“ /
“YellowGreen“: Display subtitles in
white, transparent, grey or
yellow-green background.
• “Subtitle FontColor”:
- “Red“ / “Blue“ / “Green“: Display
subtitles in red, blue or green font.
“PVR Configure”:
• “Record Device”: Select the disk for
recording.
• “Format”: Format the selected disk.
