HDMI EXTENDER OVER TP
４
6. CONNECTION AND OPERATION
1) Connect the HDMI input sources.
2) Connect two CAT-5e cables to both the output of the sender and input of the
receiver.
3) Connect the HDMI output into the receiver.
4) Plug the power into the receiver.
Attention: Insert / Extract cable gently.
7. CONNECTION DIAGRAM
DC 5V
CAT-5e cables
Sender Receiver
8. TROUBLESHOOTING
If the product does not work properly, please check following four points:
First, check if the connection between the HDMI cable and the extender is correct.
They all should be connected with cables of 1.8 meters or less. (In other words,
make sure that the problem is not caused by a too long cable).
Second, measure the cable length you are attempting to use between the sender
and the receiver.
If the signal is present under those conditions, make sure that the power is
available to the product.
Lastly, inspect the cables and connectors for damage.
HDMI signal source
such as STB
Display Such as
LCD TV
