Copyright 2012 ValuePoint Networks, Inc. All rights reserved.
2
Provide The User and Password in the text fields.
When connecting or reconnecting PPPoE it is recommended to reset or reboot the DSL
Modem first and then reboot the Controller 3500.
1.2.3. Static WAN IP Address
If you have Static IP settings provided by your ISP, or you are adding the Controller to an
existing network, select
Express Setup
– Static IP
Provide the IP, Netmask, and DNS Server values provided by your ISP.
1.3. Configure LAN settings:
You can assign the LAN IP settings of the Controller by selecting:
Networks
– WAN / LAN – Device IP
In most installations the Controller will provide DHCP services and IP addresses to Wired
and Wireless subscribers. If you change the default IP Address be sure the DHCP
settings match. Otherwise DHCP clients will receive addresses that cannot connect to
the Controller. To configure DHCP Select
Networks
– Server – DHCP Server
Default LAN IP:
192.168.1.1
Default LAN Netmask:
255.255.255.0
Default DHCP:
DHCP Server
Default Start IP Address:
192.168.1.10
Default IP Pool Size:
100
Default Duration:
1440 minutes
It is a good practice to reserve static addresses for Access Points or other hardware on
the network, so that you can always find them. By default, addresses 192.168.1.2 to
192.168.1.9 will not be distributed by DHCP, and can be assigned as static addresses.
1.4. Configure Authentication
You have six authentication options in the Controller: Local, RADIUS, Hampton Inn HSIA,
Terms of Service, PMS, or No Authentication. You can select No Authentication to
create an open system.
Please note that all subscribers will need to establish a session on the Controller by
opening their web browser before they can ping, send email, or establish other
connections to the Internet. If using No Authentication they will not be interrupted or
asked to login in any way when using their web browser.
The default authentication of the Controller:
No Authentication
Default Local User Account:
Username:
guest
