OPERATING INSTRUCTIONS
To load your nailer:
1. DISCONNECT NAILER FROM THE AIR SUPPLY!
2. Pull pusher (B) back to magazine rail until it locked into Pusher hook(B-1).
Figure 3. Catch lever engaged and magazine pusher retracted.
3. Insert a strip of Finish nailer, pointed-end down, into the magazine as shown in Figure 4.
Be sure the
fasteners are pointed DOWNWARD.Only those fasteners specified under TECHNICAL DATA may be used
Figure 4. Loading nails into magazine.
4. Press the pusher hook(B-1),then slowly release the pusher(B),it slides back to the magazine. Then pusher
will stop when it rests against the end of fasteners.
