UNPACKING
-If you discover the nailer is damaged after you have signed for delivery, please immediately where you buy for
advice.
-Save the containers and all packing materials for possible inspection by the carrier or its agent. Otherwise, filing a
freight claim can be difficult. When you are completely satisfied with the condition of the shipment, you should
inventory the equipment.
-After you open the nailer box, you should find the following. Model T64C Inventory
(Figure 1)
A. T64C Finish Nailer
…............................ 1
B. Safety Goggles ................................... 1
C. Bottle for Oil......................................... 1
D. H ex Wrench 3mm............................... 1
E. H ex Wrench 4mm............................... 1
F. Carrying Case........................................1
KEY PARTS DIAGRAM
IMPORTANT INFORMATION
Compatible compressors
GUIDELINES FOR PROPER USE AND OPERATION
Be sure to use a proper air compressor with air powered tools.
General use
This nailer drives 16Ga Finish Nails 1
”~2-1/2”, If feature a die-cast aluminum housing and a comfortable handle for
optimal control and comfort, even during extended use. It is well balanced for stability, and ergonomically designed
with a longer handle for ease of operation. It also features a hardened driver blade for longer life, and economical air
consumption with low noise. This air powered nailer is specifically designed for professional work.
Air system
Always use clean, dry, regulated, compressed air at 4.8 to 7.5 bar (70 to 110psi).
Do not exceed the maximum or minimum pressures. Operating the tool at the wrong pressure(too low or too
high) will cause excessive noise or rapid wear of tool.
No.
Description
No.
Description
1
Magazine
4
Trigger
2
Gun Body
5
Air inlet plug
3
Cylinder Cap
3
4
5
1
2
