MANUAL
20
Rev. DgL 3.3.9
»
Put the selector in position O MIN
to always work in MINIMUM fl ame.
(WITHOUT
AUTOMATIC CONTROL OF TEMPERATURE).
»
Put the selector in position II MAX
to always work in MAXIMUM fl ame
(WITHOUT
AUTOMATIC CONTROL OF TEMPERATURE)
»
To set a reference temperature, to use in automatic mode, proceed as follows:
1. Unlock the keyboard by pressing a key for 1 s: the display will show the “
UnL
” label.
2. Enter the Set-Up d by touching the SET button: the display will show the “
SP
” label
3.
Use the ▼ ▲ buttons to increase or decrease the operating temperature.
Choose the desired temperature for cooking food in the oven.
4.
Press the SET button again to confi rm and exit the programming.
»
To turn off the gas burner, press the GREEN button OFF
and close the general
gas valve. To keep the heat inside the oven, close the mouth of the oven with its own
door.
ATTENTION
IF THE CONNECTIONS ARE NOT RESPECTED WITH THE L-N POLARITIES,
THE
BURNER DOES NOT HAVE A FLAME PRESENCE AND SWITCHES ON INTO
IGNITION
.
THE APPLIANCE MUST BE CONNECTED TO A 230V / 50HZ WALL POWER SOCKET
WITH FIXED STAGE AND NEUTRAL.
IT IS NOT PROVIDED WITH PLUG, BEING THE STAGE-SENSITIVE APPLIANCE. NEED TO
PAY PARTICULAR ATTENTION TO CORRECT CONNECTION OF THE POWER SUPPLY
PHASE AND NEUTRAL.
