4) Mode Selection
Press the Mode button to cycle through different modes. The modes will appear in Photo
mode/Video mode/Play back mode:
• Video mode - Record video
• Photo mode - Capture photo
• Play back mode - Video/Jpg
Setting
After powering the device, press the menu button to access the setup interface. In the setup
interface, use the Navigation Up/Down Buttons to select the desired setting and press the OK
button to access the item.
Video Mode Setting
• Resolution: Allows you to choose between the different screen resolutions including:
1080FHD (1920x1080) /1080P(1440*1080) / 720P (1280x720) /
WVGA (848x480) / VGA (640x480) / QVGA (320x240)
• Loop Recording: Off / 1 minute / 2 minutes / 3 minutes
• Exposure: +2/3 / +1/3 / +0.0 / -1/3 / -2/3 / -1.0 / -4.3 / -5/3 / -2.0
• Motion Detection: Off / On
• Record Audio: Off / On
• Data Stamp (Will automatically add a watermark to all recordings with the date and time):
Off / On
• G-Sensor: Off / High / Middle / Low
• Beep Sound: Off / On
General Setting
• Date/Time (used to input the current date and time): YY/MM/DD
• Auto Power Off: Off / 1 Minute / 3 Minutes
• Language: English / Français / Español / Português / Deutsc / Italiano /
简体中文
/
繁體中
文
/
Русский
/
日本語
/
한국어
• Frequency: 50Hz / 60Hz
• Screen Saver: Off / 3 Minutes / 5 Minutes / 10 Minutes
• Image Rotation: Off / On
• Format: SD Card
• Default Setting (Will restore the device back to original factory settings)
• Version (Indicates the current firmware/hardware of the device)
Photo Mode Setting
• Capture Mode: Single / 2S Timer / 5S Timer / 10S Timer
• Resolution: 1.3M 1280 x 960 / VGA 640 x 480 / 2MHD 1920 x 1080 / 3M 2048 x 1536 / 5M
2592 x 1944 / 8M 3264 x 2448 / 10M 3648 x 2736 / 12M 4032 x 3024
• Sequence: Off / On
• Quality: Fine / Normal / Economy
• Sharpness: Strong / Normal / Soft
