START USING THE WIRELESS SPEAKER
1) Charging the wireless speaker
Connect the USB charging cable to the speaker located on the right side of the speaker.
Note: Please charge the speaker for at least 8 hours before first use. Please make sure that the speaker is
switched off when charging is in progress.
Light indication:
Pairing:
Blinking blue
Paired successful:
Solid blue
TF card reader:
Solid red
Charging:
Solid red
Off
when full charged
2) Pairing the wireless speaker (switched off)
Step 1: Activate Bluetooth function on your mobile device to begin pairing with speaker.
Step 2: Press and hold onto the On/Off button located on the side of the speaker to turn on,
blue LED light will be blinking. The speaker now have entered pairing mode.
Step 3: Connect to the speaker by selecting ‘Valore OP13’ under the device list. Enter ‘0000’
for password if required.
Step 4: Once connected, the LED light at the Bluetooth button will be solid blue.
Note: If the pairing is not successful, please turn off wireless speaker first, and then re-pair again. After pairing
is successful, paired devices will remember each other. Unless pairing information is deleted because of new
pairing, no need to pair when using the next time.
If you want to pair the wireless speaker with other devices, please turn off Bluetooth function of existing source
device, and pair the wireless speaker with the new device according to steps 1-4 mentioned above.
3) Wireless speaker controls
Multi-functional button
- When on calling, short touch to answer / hang up.
- When playing music, short touch to play / pause.
Previous song/Volume’-’
- Short touch for previous song / long press for volume decrease.
Next song/’
- Short touch for next song / long touch for volume increase.
Play/Pause/Call button
- When the call come in Short press to answer/Long press to hang up calls. Short
press for play/pause music. Long press for 2 seconds to redial last call.
