![background image](http://html1.mh-extra.com/html/valore/l3-1800kn/l3-1800kn_installation-manual_852148037.webp)
37
Installation
Fuel Beds
Decorative Glass Murano Kit 1800DGMV2
Materials Required
1800DGMV2 Decorative Glass Murano Kit, which con-
tains:
• 6-piece glass platform
• 4 sheet metal runners
• 2 sheet metal cross runners
• 2 bags of clear
fi
reglass
Installation
Carefully unpack the kit.
1. Install the 4 sheet metal runners around the burner.
The open end of the runners are oriented toward
the middle and the bags at the bottom. The tabs
fi
t
into the slots of the burner supports.
2. Install the sheet metal cross runners at each end of
the assembly, linking the front and rear runners by
inserting the cross runners tabs into the slots of the
runners.
3. Place the glass pieces as shown, smooth side up, on
the runners. All around the runners, vertical tabs
keep the glass pieces together. Note that the rear
glass pieces are narrower than the front pieces.
Front (tabs
with hole)
Rear glass pieces
narrower than front ones
Fits around pilot