START USING THE WIRELESS EARPHONE
1) Charging the wireless earphone
a) Ensure the earphone is off before charging.
b) Connect the micro USB end of the charging cable to the Micro USB charging port and the
standard USB end to a charging port.
c) The LED indicator will be red whilst charging. It will turn off when it is fully charged.
Note: Please charge the earphone for at least 8 hours before first use. Please make sure that the earphone is
switched off when charging is in progress.
2) Pairing the wireless earphone (switched off)
Step 1: Activate Bluetooth function on your mobile device to begin pairing with earphone.
Step 2: Press and hold onto the power button until the LED light flashes.
Step 3: Connect to the earphone by selecting ‘Valore BTS04’ under the device list.
Step 4: Once connected, the LED light will flash blue every 4 seconds.
If password is required, enter ’0000’ or ‘1234’.
Note: If the pairing is not successful, please turn off wireless earphone first, and then re-pair again. After
pairing is successful, paired devices will remember each other. Unless pairing information is deleted because
of new pairing, no need to pair when using the next time.
If you want to pair the wireless earphone with other devices, please turn off Bluetooth function of existing
source device, and pair the wireless earphone with the new device according to steps 1-4 mentioned above.
3) Controls
Cancel a call
Short press MFB once
Function
Operation
Answer a call
Short press MFB once
End a call
Short press MFB once
Redial the last number Double press MFB
Microphone mute
Double press MFB
Cancel mute
Double press MFB
Call transfer
Long press and hold
(earphone to phone)
for 2 seconds
Reject a call
Long press MFB until
call
is
rejected.
