START USING THE WIRELESS SPEAKERS
1) Charging the wireless speakers
Connect the USB charging cable provided to the Micro USB charging port either on the
speaker or the charging dock. A red indicator will light up when charging and will switch off
when wireless speakers are fully charge.
Note: Please charge the speakers for at least 8 hours before first use. Please make sure that the speakers is
switched off when charging is in progress.
2) Pairing the wireless speakers (switched off)
Single:
Step 1: Activate Bluetooth function on your mobile device to begin pairing with speaker.
Step 2: Press and hold onto the power button until the LED light is flashing blue.
Step 3: Connect to the speakers by selecting ‘Valore BTS16’ under the device list.
Step 4: Once connected, the LED light at the will be solid blue.
Dual:
Step 1: Activate Bluetooth function on your mobile device to begin pairing with speakers.
Step 2: Press and hold onto the power button on both speakers until the LED lights are
flashing blue. (Wait for 5 seconds for both speakers to pair with each other. There will
be a sound alert when speakers are paired.)
Step 3: Connect to the speakers by selecting ‘Valore BTS16’ under the device list.
Step 4: Once connected, the LED light at the will be solid blue.
Pairing code “0000” or “1234” might be needed.
Note: If the pairing is not successful, please turn off wireless speakers first, and then re-pair again. After
pairing is successful, paired devices will remember each other. Unless pairing information is deleted because
of new pairing, no need to pair when using the next time.
If you want to pair the wireless speakers with other devices, please turn off Bluetooth function of existing
source device, and pair the wireless speakers with the new device according to steps 1-4 mentioned above.
