START USING THE WIRELESS EARBUDS
1) Charging the wireless earbuds
Earbuds are charged through connecting pin contacts when placed into the charging dock.
The LED indicator blinks blue while charging and goes off when fully charged.
When charging dock is being charged, the 4 LED indicators blink blue in sequence. When
fully charged, the indicators will stay solid.
Note: Please charge the earbuds for at least 8 hours before first use.
Please make sure that the earbuds are switched off
when charging is in progress.
2) Pairing the wireless earbuds (switched off)
Step 1: Activate Bluetooth function on your mobile device to begin pairing with earbuds.
Step 2: Remove earbuds from charging dock, wait for earbuds to connect to each other
(Voice prompt). The main earbud’s LED indicator will flicker red and blue.
Step 3: Connect to the earbuds by selecting ‘Valore BTi36’ under the device list.
Step 4: Once connected, the LED light at the will be solid blue.
If the pairing is not successful, please turn off wireless earbuds first, and then re-pair again. After pairing is
successful, paired devices will remember each other. Unless pairing information is deleted because of new
pairing, no need to pair when using the next time.
If you want to pair the wireless earbuds with other devices, please turn off Bluetooth function of existing source
device, and pair the wireless earbuds with the new device according to steps 1-4 mentioned above.
3) Wireless earbuds controls
Power on - Remove from charging dock / Press and hold multi-functional button
Power off - Place in charging dock / Press and hold multi-functional button
Multi-function button (Right):
Pick up call - Short press
Hang up call - Short press
Switch language - In pairing mode, double press to switch bewteen chinese and english
Multi-function button (Left):
Switch between mobile and earbuds - Press and hold
Reject call - Double press
To mute / unmute - Double click while in calling mode
Play/Pause music - Short press
Three-party call: If there is and incoming call during a call, press once to hang up call A and
answer new call. Double press to switch between call A & B.
