Reference edge
The default reference edge of the instrument is the rear segment of the
instrument.Short press key can switch the reference edge.
Consider self length
Not consider self length
Sound setting
Clear-off function
Signal strength indication
In the shutdown mode
→
Long press the "ON" key until
“boob” is displaye
d→
long press the "ON" key until
"CRL.”is displaye
d→
Long press the "ON" key until the "BP.on" is displaye
d→C
lick the
"ON" key to adjust sound On/
Off→Pr
ess the "OFF" button to save the operation.
Short Press on button,the last measurement will be canceled. While
using the same function or single measurement to the area or volume etc), the
clear-off button can be used to eliminate last measuring operation and arrange
the measurement once again.
C OFF
/
While all the segment code of signal are displayed, it means that there shall be
the stronger echo signal strength of measurement; while less segment code was
displayed, it shall mean the relatively reduced echo signal strength of measurement.
Measurement
Single measurement
When the laser is off,short press the but
ton to turn on the laser,and the
laser icon on the screen will be flashing,with short press but
ton again it shall
start measurement.The device will display the measurement result automatically.
Continuous measurement
Press t he button shortly to turn on the laser. Press the butt
on for
about 2 seconds to start continuous measurement. Press the button again
shortly to stop continuous measurement During continuous measurement, the
main display area displays the real-time measured value, and the auxiliary
display area displays the max and min value during the measurement.
ON
ON
ON
ON
