START USING THE LASER DISTANCE METER
Functions
1. ON
a) Power ON
b) Start single/continous measurement
2. Area/Volume/Pythagorean
a) Area measurement
Short press key until square icon is shown. Press ON, the first edge is measured. Press ON
again to finish second edge measurement. The device will calculate automatically and results
will be shown in the main displaying area.
b) Volume measuerment
Short press key until cube icon is shown. Press ON to finish the measurement on the three
edges respectively. The device will perform th volume calculation automatically and results will
be shown in the main displaying area.
c) Pyhthagorean measurement
This is mainly used to calculate target distance that cannot be directly measurerd.
Short press key until triangle appears on the display. According to the screen prompts, press
the ON key to complete the measurement from right angled edge to right-angled edge edge or
hypotenuse to right-angled edge, respectively. After the measurement is completed, the device
will automatically perform the Pythagorean calculation, and the results will be displayed in the
main display area.
3. Rear/Front-end unit
Rear/Front-end baseline
4. C/OFF
a) Power OFF
b) Clear data
5. +/-/U
a) add/minus data
b) Unit switch
