WARNING: DO NOT POUR THE WATER OUT FROM THE AIR OUTLET IN ORDR TO AVOID THE
WATER TOUCHES THE CIRCUIT BOARD
For cleaning the diffuser, please do the following:
1. Turn off the diffuser and remove the cover, then start pouring out all the water to proceed
cleaning.
2. To clean the atomizer plate, please use cotton stick to clean the surface with dilute netural
detergent, then rinse with clean water.
3. To clean the splash board, pull out the splashboard and use the cotton stick to clean the
surface with diluted netural detergent, then rinse with clean water.
4. Use soft cloth to clean the surface of the diffuser. Do not use medical diluent, phenethyl
alcohol or so on to clean the diffuser, otherwise it will discolour the diffuser.
5. Please unplug the power cord, clean up the diffuser and store it in a dry place if the product
is not being used for a long period of time.
Please follow these steps if the machine stopped working:
UNABLE TO SWITCH
ON THE DIFFUSER
Check if the USB cable is connected with the power plug.
To check if the power go through the power plug, you can
unplug and replug it again.
POWER ON
(YELLOW LIGHT
FLASH ONCE) BUT
NO MIST
1. Make sure that the water volume reached the minimum
water level.
2. Check if there are any dirt on the ultrasonic atomizer
plate.
3. Check if there are blockage on the mist hole.
4. Check if there are dirt/dust on the air-inlet.
