21
`````
Fit the weather shield and guard to the back of the flue unit as detailed
below (see figures 33 & 34).
10.1
Remove the two screws near the sides of the terminal end just
below the louvres. Remove the screw near the bottom of the terminal
end.
10.2
Place the weather shield in position aligning the holes in the
shield with those at the sides of the end plate. Secure with the two
screws previously removed. see figure 33.
10.3
Fit the terminal guard (see figure 34). Secure the guard at
the bottom and at the top between the two right hand columns of
louvres using screws included in the fixings pack and the washers
which were holding the guard to the convection box for transit
(see section 4.3) .
Figure 34
Terminal Guard Installation
P A R T 1 0 :
T E R M I N A L G U A R D I N G
Figure 33 Weather Shield
Installation
