Valor RetroFire RF24DN Скачать руководство пользователя страница 2

Страница: 2 / 28

We recommend that our gas

hearth products be installed

and serviced by professionals

who are certified in the

United States by NFI (National

Fireplace Institute

Thank You ...

For purchasing a Valor Retrofire. Your new radiant gas heater is a technical appliance

that must be installed by a qualified dealer. Each Retrofire is fully tested during the

production process for your safety and comfort.

Your unit has been professionally installed by:

Dealer Name _______________________________________

Phone Number ______________________________________

Should you encounter an operational problem, call your dealer immediately.

Do not try to repair the unit as you may cause an injury or damage the fireplace

The information contained in this installation manual is believed to be correct at the time of printing.

Miles Industries Ltd. reserves the right to change or modify any information or specifications without

notice. Miles Industries Ltd. grants no warranty, implied or stated, for the installation or maintenance

of your heater, and assumes no responsibility for any consequential damage(s).

Designed and Manufactured by / for

Miles Industries Ltd.

190–2255 Dollarton Highway, North Vancouver, BC, CANADA V7H 3B1

Tel. 604-984-3496 Fax 604-984-0246

www.valorfireplaces.com

© Copyright Miles Industries Ltd., 2010

Do not put

furniture or other objects

in this space in front of

the fireplace:

36” (0.9 m)

Fireplace

Hearth

Содержание RetroFire RF24DN





























Результаты поиска

Содержание RetroFire RF24DN

Отзывы:

Похожие инструкции для RetroFire RF24DN

Бренды по названию

Популярные бренды

Valor RetroFire RF24DN, Инструкция по установке и эксплуатации

Результаты поиска

Содержание RetroFire RF24DN

Отзывы:

Похожие инструкции для RetroFire RF24DN

Бренды по названию

Популярные бренды