Valor MADRONA MF28JN, Инструкция по установке и эксплуатации

Страница: 28 / 46

28 28
Installation
Fasten thermal switch to
underside of burner module
using 2 existing screws
Install Fan (if used)
If the Circulating Fan Kit (blower) is to be installed, we
suggest that you do it now.
1. Take the fan out of its package.
2. Remove the mounting plate from the fan and
discard it.
3. Position the fan in such a way that its exhaust is
directed upwards, towards the space between the
inner and the outer walls of the
fi rebox.
NOTE: You may need to remove the burner to
access the back of the stove. If this is the case,
fi rst
remove the rear log support (NG/LPG) and the front
log support (LPG), and then, the burner.
4. Using 3 screws, fi x the fan to the fi rebox bracket.
5. Fix the fan control box bracket provided to the
control box with 2 screws.
6. Fix the bracket, with the control box attached, to the
casting base of the stove from underneath.
7. With 2 screws from the burner plate, fi x the fan’s
thermoswitch to the underside of the burner plate,
behind the pilot area.
8. See instructions with the 555CFK kit for complete
details.
Fan control
box position
Fan control
box bracket
Stove MFCS01 or MFCS02
Arched or Square Fronted
Fan control
box position
Fan control
box bracket
Stove MFCS04
QUALIFIED
INSTALLER