64
Appendix A—Lighting Instructions
WARNING
: If you do not follow these instructions exactly
FOR YOUR SAFETY, READ BEFORE LIGHTING
A. This appliance has a pilot which must be lighted by hand or by remote control. Follow these instructions exactly. To
save gas, turn the pilot off when not using the appliance for a prolonged period of time.
%%()25(/,*+7,1*VPHOODOODURXQGWKHDSSOLDQFHDUHDIRUJDV%HVXUHWRVPHOOQH[WWRWKHÁRRUEHFDXVHVRPHJDV
DUHKHDYLHUWKDQDLUDQGZLOOVHWWOHRQWKHÁRRr.
WHAT TO DO IF YOU SMELL GAS
• Do not try to light any appliance.
• Do not touch any electric switch; do not use any phone in your building.
• Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions.
• If you cannot reach your gas supplierFDOOWKHÀUHGHSDUWPHQW
C. Use only your hand to push in or turn the control knobs. Never use tools. If the knobs will not push in or turn by hand,
GRQ·WWU\WRUHSDLUWKHPFDOODTXDOLÀHGVHUYLFHWHFKQLFLDQ)RUFHRUDWWHPSWHGUHSDLUPD\UHVXOWLQDÀUHRUH[SORVLRQ
D. Do not use this appliance if any part has been under water,PPHGLDWHO\FDOODTXDOLÀHGVHUYLce technician to inspect
the appliance and to replace any part of the control system and any gas control, which has been under water.
LIGHTING INSTRUCTIONS
TO TURN OFF GAS TO APPLIANCE
Fig 3
AUTOMATIC SHUT-OFF (using the remote control handset):
D¿UHRUH[SORVLRQPD\UHVXOW
causing property damage, personal injury or loss of life.
5
Further short acoustic signals indicate the ignition process is in progress When the pilot is lit,
the Flame Adjustment knob (3) will automatically rotate to the highest setting. Press the button
on the remote control handset to reduce the flame height.
On the remote control handset, press the button; a short acoustic signal confirms the start has begun.
3. AUTOMATIC IGNITION: MAN-knob (2) in ON position. Ensure Flame Adjustment knob (3) is set to lowest
setting (Fig. 1). Locate the pilot (Fig. 3.) inside the firebox.
follow “B” in the safety information above on this label. If you don’t smell gas, go to the next step.
Wait five (5) minutes to clear out any gas, then smell for gas, including near the floor. If you smell gas,STOP!
1. STOP! Read the safety information above
2. TO CLEAR ANY GAS, turn main valve off by pressing the button on remote handset (1).
4. MANUAL IGNITION: MAN-knob (2) in MAN position (Fig. 2).
With the window off, locate the pilot (Fig. 3) inside the firebox. Set Flame Adjustment
knob (3) to the lowest setting. Push down the metallic core (4) with a pen or
similar instrument; this will establish the pilot gas flow. Light gas at the pilot (5) with a match.
Continue holding down metal core (4) for about 10 seconds; after release, pilot should remain lit.
If the pilot will not stay lit after several tries, turn the gas control knob (3) to OFF and call
your local service technician or gas supplier. Reinstall the window and set the MAN-knob (2) to ON;
turn Flame Adjustment knob (3) up or down manually or use the and buttons on the
remote control handset to adjust the flame height.
1
OFF
Press and hold the button on the remote control handset to shut-off the main burner gas flow.
Press the button on remote handset to shut-off the appliance, including pilot flame.
Fig 1
Fig 2
Spark
5
