20
20
• A non-combustible hearth is not necessary in front of this appliance.
• Note that the unit is installed at the framing stage and
xed to framing using support angles. See page 30. Wall
nish is then installed over the support angles up to the black frame on the unit.
NOTE: If using a 613CCB front, refer to the kit’s instruction manual for framing dimensions.
33-3/4” to
header
29-3/4” to wall finish
30-3/4” when using
645CFV Clearview Front
35-1/2”
Wall Finish
This is the framing
width. Wall finish
to 32-3/16” wide.
16” min. straight out or off the top venting.
Allow for elbow if rear vent with rise.
When the appliance is installed directly on carpeting, tile or other combustible material other than wood
ooring,
the appliance shall be installed on a metal or wood panel extending the full width and depth of the appliance.
Framing
45-1/2” (115.5 cm) min.
45-1/2”
(115.5 cm) min.
1-1/2”
(38 mm)
min.
clearance
64-1/4”
(163.2 cm) min.
FRAMING IN A CORNER
QUALIFIED
INSTALLER
