22
Synchronize Remote Control
The receiver and the handset of the remote control
system must be initially synchronized before the
fi
rst
use.
1. Insert 4 x 1.5V alkaline batteries in the holder and 1
9V alkaline battery in the handset.
2. On the left hand side of the
fi
rebox, pull the loose
wire that is already connected to the receiver and
connect it to the battery holder. Place the battery
holder to the left of the
fi
rebox, in front of the re-
ceiver.
3. With a sharp object, press and hold the receiver’s
RESET button until you hear one short and one long
beep. Release the reset button after the second beep.
4. Within the subsequent 20 seconds, press the small
fl
ame button on the remote handset until you
hear two short beeps con
fi
rming the synchronization
is set.
This is a one time setting only and is not required when
changing the batteries in the remote handset. The
remote control system is now ready to use.
Installation
Remote Control Pairing
Battery
holder
Battery
holder
Battery
connections
Reset
button
