5.10
APPLIANCES WITH STANDARD FRONT
INSTALL THE FRONT TO THE APPLIANCE
5.10.1
Attach the front frame to the appliance with two
screws previously removed at the top and one near
the bottom corners each side (see fig. 24).
5.10.2
Hook the bottom louver unit on to the brackets near
the bottom of the frame sides (see fig. 25).
Take care not to trap any wires or thermostat parts
between the frame and appliance case.
Make sure that the thermostat control wheel is free
to rotate in the opening in the frame side.
5.10.3
Locate the hooks on the inner front unit into the
slots at each side of the fire box. Push the inner
front fully downwards (fig, 26).
Fig. 26 Inner front unit attachment
(Standard front appliances)
Fig. 24 Front Frame Attachment
5.11
APPLIANCES WITH CAST FRONT
5.11.1
Attach the front frame to the appliance with two
screws at the top and one near the bottom corners
each side (see fig. 24).
5.11.2
Attach the bottom front casting by hooking the two
steel locators at back of the casting over the
brackets at the bottom of the front frame sides (see
fig. 27).
Fig. 25 Bottom Louver Attachment (Standard Front)
Fig. 27 Bottom Front Casting Location
17
