Designed and Manufactured by / for
Miles Industries Ltd.
190 – 2255 Dollarton Highway, North Vancouver, B.C., CANADA V7H 3B1
Tel. 604-984-3496 Fax 604-984-0246
www.valor
fi
replaces.com
Because our policy is one of constant development and improvement, details may vary slightly from those given in this
publication.
Fit Speci
fi
cations Label
1. Fit the conversion label with new speci
fi
cations over
the corresponding speci
fi
cations on the data plate
located at right hand side of the
fi
replace opening
on a plate marked
Lighting/Operation Instructions
.
2. Fit the label
“This appliance was converted on... by...”
near the data label
fi
tted in 1.
3. Fit the label
“This control has been converted...”
on the
left hand side of the appliance near the valve.
Adjust Air Shutter
1. Locate the aeration adjustment lever behind the
appliance’s front panel.
2. Adjust the aeration lever left and right as required.
See
Installation Manual
for details.
Open
Closed
Reassemble Fireplace
Reverse all the previous steps taken in the previous
section,
Prepare the Appliance
, on page 2.
1. Replace media platform (no screws).
2. Replace the window.
3. Replace any installed fronts, doors, and trim.
Consult your
Installation Manual
for full details of the
above steps.
Reinstall 2-piece platform
5