Valor 1700KN, Руководство для владельцев жилья

Страница: 17 / 32

17
The pilot light and burner fl ames should be checked
periodically. Check after the fi re has been on for at
least 30 minutes. The pilot fl ame must cover the tip
of the thermocouple probe. The main burner fl ame
pattern will vary depending on the type of installation
and climatic conditions.
Performance of propane gas
fi replaces may be
a ff ected by the quality of commercial gas supplied
in your area.
The
fi replace area must always be kept clear and
free from combustible materials, gasoline and other
fl ammable vapors and liquids.
Inspect the vent terminal outdoors regularly to
ensure that it is not obstructed by snow, trees,
bushes, leaves, or other objects. We recommend at
least an annual inspection.
Checking pilot and burner flames
Pilot fl ame
Thermocouple
probe must be in
fl ame
Note
The height and color of your flames can vary
depending on fuel type, fuel quality and
mixture, altitude, and aeration adjustment at or
after installation.
The photos of typical flame appearance are for
illustrative purposes only. Your fireplace may be
operating normally but appear different than
the photos.
Venting configuration, elevation, burner
aeration setting and local fuel heating value can
all affect flame appearance.
Typical fl ame appearance (L1)
Driftwood log kit
Splitwood kit
Decorative Murano Glass kit
Rock & Shale kit
Birch Log kit
Pilot Light
Pilot Light
Pilot Light
Pilot Light
Pilot Light