
2
Installation
1. On completion of
fi
replace installation, screw the
linerbox bracket to top face of
fi
rebox with 4 screws.
2. Carefully position and secure steel front panel with
4 low pro
fi
le screws to 4
fi
rebox mounting brackets.
Before tightening, hold panel up against wall
fi
nish
then tighten.
3. Slide the removable panel in the clip on the horizon-
tal supports on each side and push it in until
fl
ush
with the front trim.
4. Adjust the position of the convection brackets on
each side of the window. Release the nut, pull the
bracket as forward as possible and tighten the nut.
5. Identify left hand door from right using diagram
below.
LH Door
RH Door
finger grip inboard,
with locator on right
RH door has a
slot in upper
locator tab
finger grip inboard,
with locator on left