INSTALLER’S GUIDE
Page 16
Figure 17
Figure 16
Figure 15
Figure 14
Figure 13
6.
Place a type “A” coal between the
front and rear base coals with the letter
“A” upright and so that the coal is
against the left side of the firebox. See
figure 13.
7.
Place a type “B” coal between
the front and rear base coals as
shown in figure 14. The letter “B”
should be upright.
8.
Place a type “A” coal between
the front and rear base coals with the
letter “A” upright. The top of the
coal should rest against the centre
coal of the rear base coal as shown
in figure 15.
9.
Place the remaining type “B” coal
at the right side of the firebox
between the front and rear base coals.
The letter “B” should be upright. The
coal should touch the right side of the
firebox. See figure 16.
10.
Place the remaining type “A”
coal between the front and rear base
coals. The letter “A” should be
upside down with its rear face
between the right and centre coals of
the rear base coal. Angle the coal so
that the gap between it and the type
“B” coal to its right is appreciably
larger than the gap between it and
the type “A” coal to its left but do not
have it touching the type “A” coal.
This will give the best flame effect.
See figure 17.
