Valor Fires Clarissa, Руководство по установке

Страница: 9 / 12

Step 6. Fitting the infill strips to the wall.

Measure and mark the back panel opening position onto the wall then place the
back panel aside. We recommend that the strips are fitted to the wall approximately
50mm clear of the back panel opening (See figure 8). Mark the central positions of
the fixing points on the wall. Drill
suitable sized holes at the fixing
points for the wall plugs supplied.
Insert four wall plugs (J). Locate
and secure the strips to the wall
using four (M) screws.

Measure the thickness of the
back panel. 75mm minus this
figure gives the required distance
from the top face of the strips to
the wall. To adjust the depth of
the strips to the wall, simply
loosen the screws securing the
strips to the brackets, adjust to
the required depth and tighten
the screws.
Page 9
INSTALLATION GUIDE
©
Baxi Heating U.K. Limited 2009.
Figure 8.
Figure 7.