Valmet Valmet MCA, Инструкция по установке и эксплуатации, Страница: 53 / 66

Device info
Poll Addr:
The device´s HART address.
Manufacturer: Name of device manufacturer (Valmet).
Model: Device name.
Final asmbly num: Field device identification number.
Universal rev: The Universal Device Description ver-
sion supported by the device.
Tag: Text entered by the user, the tag is shown at the
top of the display after the device name.
Message: Text entered by the user.
Descriptor: Text entered by the user.
Sensor Electronics
Sensor type:
Sensor model.
Sensor S/N: Sensor electronics serial number.
Sensor HW rev: Sensor electronics revision.
Sensor SW rev: Sensor electronics software revision.
TCU
S/N A:
First part of TCU serial number.
S/N B: End part of TCU serial number.
HW rev: TCU revision.
SW rev: TCU software revision.
Cal date: TCU´s final testing date.
Cal ID: Tester´s initials.
Set Clock
Date:
The date in mm/dd/yy.
Hours:
Minutes:
Seconds:
12.4. Calibrate
Valmet MCA is calibrated with single-point calibration.
Calibrate menu contains menu items for sample taking
and entering the laboratory value.
In addition, you can perform a level correction on
the measurement, perform various special functions
and view calibration and sample history data:
M C A : M C A - 1 2 3 4
C a l i b r a t e
1
S a m p l e t a k i n g
2 E n t e r L a b
3 L e v e l c o r r
4 F i l l e r
5 L a b c a l H i s t o r y
6 S a m p l e h i s t o r y
7 S p e c i a l f u n c t i o n s
Sample taking
This function allows you to take a sample for singlepoint
calibration.
Move the cursor on to Sample taking and press the
right arrow The following display appears:
Press OK to start
sample taking
ABORT OK
Press F4 (OK). Valmet MCA begins to average the
measurement result for the sample and the following
display appears:
P r e s s O K t o s t o p
s a m p l e t a k i n g
A B O R T O K
Take the sample, and then press OK (F4) again.
Valmet MCA shows the results of its measurement:
M C A : M C A - 1 2 3 4
S a m p l i n g
r e a d y
A v e r a g e C s = 3 . 0 2 %
M i n : 3 . 0 1 % M a x : 3 . 0 3 %
T = 4 2 . 3 ° C
A B O R T O K
Select OK (F4) to return to Calibrate display.
Installation & Owner’s manual OUL00298 V2.3 EN 53 Valmet Mircowave Consistency Transmitter