69
remove the shaft sealing from the mixer (in the case, the shaft sealing is
cracked, worn or inelastic it has to be replaced by a new seal);
if you notice drops of ice cream mixture in the catcher, the shaft seal
must be replaced with a new one;
remove and inspect all seals. If the seals are cracked, worn or has lost
elasticity, it must be replaced with a new one;
all removed parts and cylinder must be cleaned in a mixture of water and
disinfection agent. While doing so, please pay special attention to
instructions of the disinfection agent manufacturer as well as hygienic
standards, which are valid in your country.
It is strictly forbidden to put plastic parts of the appliance into the dishwasher to
clean them!
