5
© Vallox Oy - All rights reserved
INTRODUCTION
IMPORTANT
Apartment-specific
ventilation units allows
residents to adjust the
ventilation efficiency.
Ventilation is controlled
based on the need e.g.
through the cooker
hood, ventilation
control panel, or a
separate control centre.
In order to ensure that
the indoor air presents
no harm to health and
remains optimal also
for the structures of the
building,
ventilation
must be kept on
without disruptions.
It is recommended
that ventilation be
left turned on during
long holidays also.
This keeps the
indoor air fresh and
prevents humidity
from condensing in
the ventilation ducts
and structures. It also
reduces the risk of
moisture damage.
NOTE
For the MyVallox
Cloud/Home
instructions, please go
to techmanuals.info/
ValloxMV/ENG/help/
webhelp
IMPORTANT
Prolonged overpressure
can result in damage
to the structures of the
building.
VENTILATION UNIT CONTROL
Ventilation unit control options.
Operation of the Vallox ventilation unit can be controlled by the
following means:
• Through the My Vallox Control panel installed in the building.
• Through the MyVallox Home local area network connection and
the MyVallox Home/Cloud user interface.
• Through the MyVallox Cloud service and the MyVallox Home/
Cloud user interface.
• Through a remote monitoring service or building automation that
uses voltage signals or Modbus messages.
In addition to the integrated humidity and carbon dioxide sensor,
ventilation can also be adjusted automatically by using the optional
carbon dioxide, humidity, or VOC (air quality) sensor. When these
are used, ventilation remains optimal even when the dwelling
is unoccupied. Each user can use the week clock to adjust the
ventilation to fit their individual lifestyle.
Filter reminder
The unit reminds the user of the need to change the filters through
the MyVallox Control panel and the MyVallox Home/Cloud user
interface, as well as by changing the relay status, if a signal light has
been connected to the relay connectors of the unit.
The filter reminder can be acknowledged:
• From the MyVallox Control panel
• From the MyVallox Home/Cloud user interface
• From the Vallox Delico PTD EC and Vallox Capto PTC EC
control hoods
— Damper closed, then open-closed-open-closed.
Press at a less than 1 second interval.
Ventilation unit setup without a MyVallox
Control panel
The ventilation unit setup can also be completed without a MyVallox
Control panel. For instructions, please go to
https://vallox.techmanuals.info/ValloxMV/ENG/help/webhelp
See instructions provided in the section Connecting the ventilation
unit to the computer.
Connecting the ventilation unit to the cloud
service
The ventilation unit can be connected to the MyVallox Cloud service.
The cloud service allows for controlling ventilation remotely also,
using e.g. a smartphone or tablet. Also the unit software is updated
automatically through the cloud service. To connect to the cloud
service, the ventilation unit must be connected to the Internet via
LAN and registered with the cloud service. At the same time you
create a MyVallox Cloud account for yourself. Read more about the
service at www.myvallox.com.
