Valleylab RapidVac 1009803, Руководство по обслуживанию

Страница: 24 / 46

Description of Symbols
3-4 RapidVac™ Smoke Evacuator Service Manual
• Harmonic distortion (IEC 60601-1-2 sub-clause 36.201.3.1 and IEC
61000-3-2)
• Conducted disturbances (IEC 60601-1-2 sub clause 36.202.6 and IEC
61000-4-6)
• Power frequency magnetic fields (IEC 60601-1-2 sub-clause 36.202.8.1
and IEC 610004-8)
• Voltage dips, short interruptions and variations (IEC 60601-1-2 sub-
clause 36.202.7 and IEC 61000-4-11)
Description of Symbols
Front Panel
Power Off/On
Turbo Button. Press to jump to maximum suction at 100% motor
speed.
Air Flow Control. Press up-arrow button (+) to increase flow 10%,
or down-arrow button (-) to decrease flow by 10%.
Power On Indicator. LED at the center of the fan illuminates when
power to the smoke evacuator is on. A flashing LED indicates the
smoke evacuator is in standby mode.
New filter. Its position next to the top filter life indicator, it
signifies the filter has 100% of its filter life remaining.
Replace filter. Its position next to the bottom filter life indicator, it
signifies the filter has no filter life remaining and needs to be
replaced.
R Button: Remote Switch Activator cord is attached to a
generator. Electrosurgery sensor will activate the smoke evacuator.
Footswitch Jack: Attach pneumatic footswitch.
Service Required Indicator: After 500 hours of use, the LED
illuminates indicating motor brushes require changing.