website:
www.valleyacrylic.com
• E-mail:
• customer service call Toll Free:
1.877.398.8827
• Fax:
+1.604.820.0124
2
VA21998
BASIN
INSTALLATION MANUAL
Thank you for choosing Valley Acrylic Products. This installation manual provides general information on the
installation of our products.
All the information in this guide is based upon the most recent product information available at the time of
this publication. Valley Acrylic reserves the right to make changes to product characteristics, packaging, or availability
at any time without notice.
Thank you for your purchase!
• Please read these instructions carefully before beginning your installation.
• Consult your local building codes to ensure that your installation complies with local standards.
• Remove the unit from its packaging. Before disposing, packaging and taking unit from your sales person, inspect the
unit to make sure it is in good shape.
• Should inspection reveal any damage or defect in the finish, please contact the authorized dealer you purchased
the product through. The warranty does not cover damages or defects in the finish once the unit has been installed.
Valley’s responsibility for shipping damages ceases upon delivery of the product in good order to the carrier. All
complaints regarding damage due to transport must be made directly to the carrier.
• Please refer to your product’s specification sheet and ensure that both your unit and build plan measure match the
stated sizes.
BEFORE YOU BEGIN
REQUIRED TOOLS & MATERIALS
Please unpack and inspect all parts carefully to make sure they are complete and not damaged. If any
parts are damaged or missing, please contact the authorized dealer you purchased the product through.
• Eye Protection (Safety glasses / goggles) strongly recommended.
• Ear protection strongly recommended.
• Cut-out template.
• Mounting clips.
• Pencil (not permanent marker)
• Tape measure.
• Jigsaw
• Ball peen hammer
• Silicone sealant
• Wrench
