![background image](http://html1.mh-extra.com/html/valley/td10a/td10a_installation-manual_3240054003.webp)
website:
www.valleyacrylic.com •
E-mail:
customer service call
Toll Free: 1.877.398.8827 •
Fax:
+1.604.820.0124
TD10A
BATHUB DOOR
INSTALLATION GUIDE
3
PANEL
DOOR
A.
A
B
B
C
D
E
A
B.
E.
C.
D.
Guide Rail Brackets
must be firmly attached to the wall. Installation into a stud is strongly
recommended. All of the guide rail bracket set screws must be tightened.
Thread Lock
must be applied to both stopper set screws. Panel-side stopper must be installed
into the pre-drilled stopper hole in the upper guide rail. Door-side stopper must be installed at
the proper position to stop the door from contacting the wall.
The Guide Block
must be installed square to the panel glass and door glass. Installing the guide
block crooked may damage the bottom edge of the door glass and lead to breakage.
Roller Wheel Safety Set Screws
must be re-tightened after installation.
Bumper Vinyl Seal
must be installed on the closing edge of the door glass.
IMPORTANT INFORMATION