website:
www.valleyacrylic.com
• E-mail:
• customer service call Toll Free:
1.877.398.8827
• Fax:
+1.604.820.0124
LIFE 3
WALK-IN BATHTUB
INSTALLATION GUIDE
Congratulations! You are now a part of the Valley Acrylic family!
CARE AND MAINTENANCE
•
When not in use, keep the LIFE3 tub door open.
•
Please clean your bath or shower on a regular basis using a soft cloth and a smooth, mild household dish soap
and water. Rinse well with water and dry with a soft clean cloth.
•
Never use abrasive cleaners, powders, pads, or liquids that contain abrasives. Avoid products such as Magic
Erasers and scouring pads as these are abrasive and will damage the acrylic.
•
Do not use aromatic solvents (essential oils), strong liquid cleansers, bleach, isopropyl alcohols, nail polish, nail
polish remover, Wintergreen oil, dry cleaning solution, lacquer thinners, gasoline, pine oil or cleaners that contain
bleach.
•
If a bathmat is used, remove immediately after each use to allow the surface to dry.
•
It is recommended that once a month the tub is flushed. As well, with every month of normal use, clean out
the pumps inlet cover by unscrewing the cover and removing any hair and debris from the cover and housing.
Remount the cover in place. Never operate the system with the cover off, as the pump creates a strong suction
and damage to the pump or injury may occur.