website:
www.valleyacrylic.com
• E-mail:
• customer service call Toll Free:
1.877.398.8827
• Fax:
+1.604.820.0124
LIFE 3
WALK-IN BATHTUB
INSTALLATION GUIDE
TWO (2) PEOPLE REQUIRED
01
02
Place the tiling flange to the LIFE3 tub as shown.
Check Installation area
After placing the tiling flange ,
seal it with a thin line of silicone
- Clean area of any debris or
trash.
- Use a level and determine if
the floor is level. If the floor
is not level, adjust all leveling
feet to perfectly level the
tub.
(STEP 4)
TILING FLANGE
TILING FLANGE
LIFE 3 TUB
LIFE 3 TUB
SILICONE
SUB-FLOOR
LEVEL
LEVEL
03
Installation Preparation
Place the tub in the alcove with
the front skirt firmly on the floor.
Note:
All plumbing
hardware (drain/waste
overflow, water supply)
must be installed prior to
setting the bathtub in place.
04
Leveling feet adjustment
- The bathtub must be set level.
To check, use a level on top of the
ledges on both ends of tub and on
top of dam
Note:
It is important that all leveling feet are completely
touching the floor and level for the unit to work properly.
Note:
It is important
that the tub is properly
level. Not following this
instruction can cause
the door to not close
properly.
Note:
There must be NO gap
between the floor and leveling legs
DOUBLE
STICK TAPE
