Valley ClassicPlus, Руководство пользователя

Страница: 15 / 36

15
Safety
Operate Safely (Continued)
!
CAUTION
CHECK WHEEL TRACKS BEFORE STARTING
Make sure all objects, livestock or persons are clear
of the machine before starting. Drive trains are pow-
erful and can climb over vehicles, equipment, etc.
!
CAUTION
KEEP CHILDREN AWAY
Pivots are NOT playground equipment.
Prevent children from playing or climbing around
on the machine. This can be extremely dangerous,
especially if the machine is operating.
!
CAUTION
CHECK MACHINE DIRECTION
DO NOT operate the machine if it moves in the direc-
tion opposite to that which was chosen.
Forward should be clockwise, and reverse should be
counter-clockwise.
!
CAUTION
KEEP WATER OFF ROADWAYS
It is against the law in most states to allow water to
spray on state and county roadways. This is a seri-
ous hazard to passing motorists.
If end guns are used, make sure you read and under-
stand the correct procedures for setting the on and
off positions to avoid watering the roadways.
If an end gun is watering a roadway, immediately
discontinue use and adjust the shutoff setting or
call your Valley dealer to repair the end gun shut off
mechanism.
!
CAUTION
AUTO REVERSE OPERATION SAFETY
If the machine reverses direction at a roadway or a
physical object such as a building, tree line, power
pole, etc., then you MUST provide a backup device
to stop the machine if the reversing mechanism were
to fail. Refer to Figure 15-1.
Contact your Valley dealer for more information
concerning physical barricades for machines under
these circumstances.
1
Figure 15-1 1. Physical Barricade
!
CAUTION
PROPER USE OF THE SAFETY OVERRIDE
Caution MUST be taken by the operator when using
the safety override function as it will bypass or dis-
able all of the machine’s automatic safety shutdown
circuits.
• NEVER DEPRESS AND HOLD THE START/STOP
SAFETY OVERRIDE SWITCH IN THE START PO-
SITION FOR MORE THAN 3 TO 5 SECONDS.
If the machine is not in full view by the operator, do
not use the Safety Override function.
The operator MUST inspect the entire machine be-
tween each safety override start attempt.
Repeated safety override start attempts can cause
severe structural damage.
Call your Valley dealer if the machine fails to start.