12) Once configured, insert coins, card swipe or bills (if equipped) to play your first game.
If you don’t have any coins
you can press the
Service Button
and then press
Free Play
on the
HMI Touch Screen
to play. Note that there is
an
“Attract”
mode that can be configured. It attracts people to the game by launching and floating a ball after a
game is over. This draws people to the game which increases revenues. Note that it will only launch once after a
game.
13) Once everything is working install the
Ball Shield
by removing the
Protective Film
and inserting it into the rear
slot near the cups.
14) Remove the Protective Coating from the Side Shields. Using a 4
mm or 5/32” hex Allen-key to install the Side
Shields using the screws provided in the Cash Box. Do not overtighten.
