4) Remove the Coin Door key from the Coin Return and unlock the Coin Door. Remove Accessory Bag inside the
Cash Box. It has the service door keys and RGB LED remote controller. Use the service key to open the top table
lid and remove the cardboard box. It has extra cups, balls, hardware, mending plates and power cord inside.
5) Remove the Black Ball Return shelf and Ball Shield from the inside of the back section of the cabinet and set
these aside.
6)
Mount the Rear Marquee Upright Section on the rear of the cabinet, using (6) 3/8” x 2 ½” Steel Dowels, (2)
Mending Plates, and (8) 3/8-
16 x ¾” Hex Head Bolts. Be careful not to crimp the Led Strips inside the T-Molding.
Please notice the Clearance Notches on the cabinet for safe routing of the LED Strips.
CAUTION:
Make sure all dowels and bolts are installed and secure.
