Valex M-LP 18, Руководство по эксплуатации, Страница: 10 / 16

- 10 -
g
SYMBOLS
Carefully observe the symbols in fig. B and
memorise their respective meanings. Correct
interpretation of the symbols allows safer use
of the machine.
1 Machine model
2 Technical data
3 Batch number (the first 2 figures of the batch
number indicate the year of manufacture)
V Volt
Hz Hertz
~ alternating current
Direct current
W Watt
mm millimetres
m metres
s seconds
kg kilograms
no no load speed
min-1 revolutions per minute
dB decibel
___________________________________________
We thank you for having purchased this elec-
trical tool that will hereafter also be referred to
as “sander”.
! WARNING! Before using this power tool,
read and apply the safety rules and instruc-
tions carefully. Before starting work make
sure, in case of emergency, that you know how
to stop the tool. Improper use of the sander
can cause injury.
Keep these instructions carefully and at hand so
that you can consult them if necessary.
IMPORTANT! The sander is suitable for
dry sanding of wood, plastic, metal, plaster
and painted surfaces. It is prohibited to use
dangerous materials in environments with
risk of fire.
The sander is made for DIY and not profes-
sional use.
This manual contains information deemed ne-
cessary for proper use, knowledge and standard
tool maintenance. It does not include information
on the working techniques of the various mate-
rials; the user can find additional information in
specific books or publications or by attending
special training courses.
COMPONENTS
Refer to fig. A and the following figures, attached
to these instructions.
1 Battery compartment
2 Main handle
3 Start / stop switch
4 Ventilation slots
5 Vibrating plate / pad
6 Dust extraction connector
7 Dust bag
8 Abrasive
INSTALLATION
! WARNING! The manufacturer is not liable
for any direct and/or indirect damage caused
by incorrect connections.
! WARNING! Before carrying out the fol-
lowing operations, make sure that the battery
is disconnected from the tool.