- 18 -
g
SYMBOLS
Carefully observe the symbols in fig. B and
memorise their respective meanings. Correct
interpretation of the symbols allows a safer use
of the machine.
1. Manufacturing batch number of the machine
2. Product model and code
3. Technical data
4. Engine data
5. Fasten the front hand grip beyond the limit
arrow
6. Fuel
7. Stopping the engine
8. Air valve (starter)
kW kiloWatt
Hp horsepower
mm millimetres
cm centimetres
m metres
min
-1
revolutions per minute
s seconds
l litres
kg kilograms
dB decibel
___________________________________
Thank you for choosing our machine. Hereinafter
it will be referred to as “internal combustion
brush cutter”.
!
!
WARNING! The internal combustion brush
cutter is ideal for mowing grass and trimming
small shrubs.
Any other use is prohibited.
This manual contains information deemed nec-
essary for proper use, knowledge and standard
machine maintenance. They do not report in-
formation on techniques for lawn maintenance.
The user will find more information in books and
specialised publications or by attending courses.
COMPONENTS
Refer to fig. A and following;
1 Rear hand grip and control unit
2 Engine off switch
3 Carburettor gas control lever (accelerator)
4 Accelerator safety lock
5 Carburettor priming pump
6 Internal combustion engine
7 Air control lever
8 Recoil starter handle
9 Air filter
10 Spark plug
11 Fuel cap
12 Front hand grip
13 Cutting head
14 Guard
15 Line cutter
16 Cutting element
17 Shoulder strap clasp
18 Fuel tank
19 Support/drive shaft
20 Handles joint
21 Shoulder strap ring
23 Easy start button
24 Handle mounting area limitation ring
25 Exhaust
26 Shoulder strap
28 Blade (if applicable)
29 Accelerator lever screw setting
30 Grease fitting