- 14 -
PROBLEMS, CAUSES AND SOLUTIONS
PROBLEM
CAUSES
SOLUTIONS
The electrical vacu-
um cleaner fails to
start
Power supply line discon-
nected
Check the electric power supply line
Plug not inserted
Insert the plug in the electric power supply
socket and press the start button
Electrical fault
Contact an authorised service centre.
The electrical vacu-
um cleaner does not
vacuum efficiently
Box full
Empty the box
Bag full
Replace the dust bag
Filter dirty
Clean
The float has intervened
(only for models that are
suitable to vacuum liquids)
Empty the box
Check that the vacuum hose
or the nozzle are not blocked
Clean. To free the hose, use the handle of
a brush to help you, pushing it up the hose
without forcing.
Vacuum head not assem-
bled correctly
Reassemble the vacuum head checking
that it fits well onto the box and lock it in
place with the latches.
Substantial increase
in motor revolutions
Vacuum hose blocked
Switch off and clean
The float blocks the vacuum Try to switch off, wait for a few seconds
and switch back on. If this has no effect,
empty the collection box.
IMPORTANT! If the electrical vacuum cleaner
still fails to operate correctly after you have
carried out the above operations, or in the
event of anomalies other than those described
above, take it to an authorised service centre
showing proof of purchase, and ask for original
spare parts. Always provide the information
shown on the technical data label.
MAINTENANCE
!
!
IMPORTANT! Before any inspection or
adjustment, always disconnect the tool from
the power supply by unplugging it.
!
!
IMPORTANT! Do not tamper or attempt to
repair the electrical vacuum cleaner.
The working life and costs also depend on con-
stant and meticulous maintenance.
Take good care of your electrical vacuum cleaner
