Valex 1411122-S550E, Руководство по эксплуатации и обслуживанию, Страница: 9 / 28

9
g
We thank you for having purchased this product that will
hereafter also be called “tool”.
WARNING! Before using this electrical tool carefully
read and observe the safety standards and operational
instructions provided hereafter. Make sure that you know
how to stop the tool in the case of emergency before
starting the job.
This jigsaw must only be used for cutting wood, pla-
stics, and metal. Any use that differs from that indicated
in this manual could damage the jigsaw and be hazardous
for the user.
ATTENTION! Carefully keep this instruction handbook in a
safe and handy place so that you can consult it when needed.
1411122 - S550E
DESCRIPTION (FIG. A2)
1 Handgrip
2 Electronic switch
3 Blade guard
4 Cutting blade
5 Adjustable support base.
DESCRIPTION OF INDICATIONS (FIG. B2)
1. Technical data (see relative section)
2. WARNING!
3. Read the instruction handbook carefully before using
this machine.
4. Electric and electronic refuse may contain potentially
hazardous substances for the environment and human
health. It should therefore not be disposed of with do-
mestic waste, but by means of differentiated collection at
specific centres or returned to the retailer in the event of
purchasing a new identical appliance. The illegal disposal
of such equipment may result in prosecution to the full
extent of the law.
CHARACTERISTICS
- Electronic speed adjustment
- Light weight and ergonomic design for easy use.
- Vacuum cleaner coupling.
- Base - adjustable 0° to 45°.
SUPPLY
The pack includes the following items:
- Jigsaw
- N0 1 blade
- Allen key
- Use and maintenance manual (this manual)
TECHNICAL DATA
Power Supply Voltage 230V~50Hz
Rated power input 350 W
Nominal stroke speed (no load) 500-3000 per min
Stroke 18 mm
Max perpendicular cut in wood 55 mm
In metal plating 6 mm
Weight 1,5 kg
Insulation class of machine II
Acoustic pressure LpA 81,3 dB(A)
Acoustic power LwA 92,3 dB(A)
Vibration cutting wood 7,7 m/s² K=1,5
cutting sheet metal 12,5 m/s² K=1,5
Individual protective earphones must be worn when the
acoustic pressure exceeds 80 dB(A).
1411123 S660EP
DESCRIPTION (FIG. A3)
1 On/Off switch
2 Retainer button
3 Oscillation adjustment wheel
4 Pendulum stroke adjustment
5 Adjustable angle base
6 Motor casing
7 Transparent guard
8 Vacuum cleaner coupling
9 Blade
10 Allen key supplied
DESCRIPTION OF INDICATIONS (FIG. B3)
1. Technical data (see relative section)
2. WARNING!
3. Read the instruction handbook carefully before using
this machine.
4. Electric and electronic refuse may contain potentially
hazardous substances for the environment and human
health. It should therefore not be disposed of with do-
mestic waste, but by means of differentiated collection at
specific centres or returned to the retailer in the event of
purchasing a new identical appliance. The illegal disposal
of such equipment may result in prosecution to the full
extent of the law.
CHARACTERISTICS
- Electronic speed adjustment
- Light weight and ergonomic design for easy use.
- Vacuum cleaner coupling.
- Base - adjustable 0° to 45°
- Adjustable pendulum stroke.
SUPPLY
The pack includes the following items:
- Pendulum Jigsaw
- N° 1 blade
- Allen key
- Guide for parallel cuts
- Use and maintenance manual (this manual)
TECHNICAL DATA
Power Supply Voltage 230V ~ 50Hz
Rated power input 500 W
Nominal stroke speed (no load) 500 - 3000 per min
Stroke 17 mm
Max perpendicular cut in wood 65 mm
Weight 2 kg
Insulation class of machine II
Acoustic pressure LpA 86,2 dB(A)
Acoustic power LwA 97,2 dB(A)
Vibration cutting wood 7,9 m/s² K=1,5
cutting sheet metal 12,7 m/s² K=1,5
Individual protective earphones must be worn when the
acoustic pressure exceeds 80 dB(A).