Valex 1410218, Руководство по эксплуатации и обслуживанию

Страница: 12 / 20

12
g
Congratulations on your excellent choice. Your new tool has been manufactured
according to the highest quality standards, guaranteeing you long term service
and safety.
This manual contains information and that deemed necessary for proper use, knowle-
dge and standard machine maintenance. It does not include information on machine
tool woodworking techniques nor does it discuss the types and processing capabilities
of the various types of wood; the user will find further information in specific books
and publications or by attending special training classes.
Warnings on use and maintenance regulations refer to normal operating needs. Normal
machine operations, working life and economy depend on their observance.
These instructions are an integral part of the machine and must accompany it in the
case of repair or resale. Carefully keep the documentation supplied with the machine
close at hand for consultation in case of need.
For any repairs or revisions that require complex operations, please contact authorised
service centres which have specialised personnel.
The manufacturer is not liable for damages due to negligence, failure to observe the
instructions in this manual and direct and/or indirect damages caused by improper
use of the machine.
Failure to observe what indicated, poor and inadequate machine use and unauthorised
tampering may void the warranty. Accident prevention therefore depends on the strict
observance of what is established in this manual.
Upon purchase, make sure the machine is integral and complete.
WARNING! Before using the machine, in order to ensure that handling, initial
start-up, starting, use, stopping, and maintenance are carried out properly, read
the instructions below that refer to the drawings and technical data and apply them
carefully. Before starting work you should be familiar with the controls and the cor-
rect use of this machine. Make sure you know how to stop it in case of emergency.
Incorrect use of this machine may result in serious injury and damage to property.
Always consider your safety and the safety of others and act accordingly.
WARNING! The machine is exclusively intended for hobby use and it is suited
to make cross and tilted cuts on parallelepiped shaped wood. Cutting metal, plastic,
fabric, flammable materials and materials that generate harmful or toxic dust and
vapours is prohibited. Any use other than that indicated in these instructions may
damage the machine and constitute a serious risk to both people and property.
MACHINE DESCRIPTION (FIG.A)
1 Base
2 Counter fastening holes
3 Adjustable work surface
4 Work surface adjustment hand wheel
5 Blade
6 Upper blade lock
7 Fixed upper arm
8 Dust blowing connection
9 Blade power adjustment hand wheel
10 Lower compartment guard
11 Dust blowing system
12 On/off switch
13 Engine
14 Cutting area guard
15 Cutting area and piece lock guard connection
16 Dust extraction connection (if applicable)
17 Piece lock
18 Oscillating upper arm
19 Blade oscillation speed regulator (if applicable)
20 Fuse (if applicable)
21 Guard height adjustment hand wheel
22 Motor brushes (if applicable)
23 Power supply plug and cable
DESCRIPTION OF MARKS AND SYMBOLS (FIG. B)
1 Machine model and technical specifications.
2 Machine code, serial number or lot number, year of manufacture, certification
symbols (if applicable).
3 WARNING!
4 Read these instructions carefully before using the machine.
5 Warning! Risk of cutting and crushing hands. It is compulsory to wear protection
gloves.
6 Warning! Risk of flying material and dangerous dust. It is compulsory to wear eye
protection and a mask to protect your respiratory tracts.
Risk of loud noise. It is compulsory to use ear protection.
7 Warning! Risk of crushing and getting trapped. Before any control, adjustment or
maintenance, always disconnect the machine from the power supply by unplugging it.
Should the power supply cable be damaged, remove the plug from the power supply
socket before inspecting it.
8 Warning! Risk of cutting and getting trapped. Keep hands away from the cutting area.
9 Warning! Risk of crushing. Keep hands away from parts in motion.
10 Electric and electronic waste may contain potentially hazardous substances for the
environment and human health. It should therefore not be disposed of with domestic
waste, but by means of differentiated collection at specific centres or returned to the
vendor in the event of purchasing a new identical tool. The illegal disposal of such
equipment may result in prosecution to the full extent of the law.
TECHNICAL DATA
SV4000 cod.1410218
Power voltage and nominal frequency _______________________ 230V ~50Hz
Nominal engine power ________________________________________ 165 W
Idle rotation speed ______________________________________no 1480 min -1
Acoustic pressure LpA _____________________________________ 79 dB(A)
Total machine dimensions (b x l x h) ____________________ 320x630x360 mm
Blade:
Length (between supports) ___________________________________ 127 mm
Blade thickness ____________________________________________ 0.5 mm
Teeth thickness ____________________________________________ 0.6 mm
Spare part code __________________________________________ 1452622
Performance:
Work surface tilt ______________________________0° - 45° counterclockwise
Cutting capacity 0° __________________________________________ 55 mm
Maximum cutting depth _____________________________________ 406 mm
SV4000E cod.1410219
Power voltage and nominal frequency _______________________ 230V ~50Hz
Nominal engine power ________________________________________ 112 W
Idle rotation speed _________________________________ no 520~1400 min
-1
Acoustic pressure LpA _____________________________________ 79 dB(A)
Total machine dimensions (b x l x h) ____________________ 305x630x360 mm
Fuse (if applicable) _____________________________________________5 A
Blade:
Length (between supports) ___________________________________ 127 mm
Blade thickness ____________________________________________ 0.5 mm
Teeth thickness ____________________________________________ 0.6 mm
Spare part code __________________________________________ 1452622
Performance:
Work surface tilt ______________________________0° - 45° counterclockwise
Cutting capacity 0° __________________________________________ 55 mm
Maximum cutting depth _____________________________________ 406 mm
GENERAL SAFETY REGULATIONS
1) NYLON BAGS ARE NOT TOYS
WARNING! Suffocation hazard. Nylon packaging bags can cause suffocation
if placed on the head and must be kept out of the reach of children. If they cannot
be reused they must be cut up and thrown in the garbage.
2) PEOPLE AUTHORIZED TO USE THE MACHINE
The use of this machine by children or anyone that is not properly informed on the
operating instructions contained in this manual is forbidden. Local laws and regulations
may establish a minimum age for use of the machine. The operator must be adequately
trained to use, adjust and safely operate the machine.
3) OPERATOR’S RESPONSIBILITY
The operator is responsible for other people as far as accidents or damage to people
or property caused by the use of the machine is concerned.
4) MAINTAIN A STABLE AND SAFE WORKING POSITION
When working, maintain a stable, safe position and do not lose balance.
5) PAY ATTENTION IN THE WORK AREA
Be careful of hands, the piece to be processed, the cutting tool, chips produced during
work and, in general, all parts in motion.
6) USE CAUTION WHILE WORKING
Do not allow yourself to be distracted and always pay attention to what you are doing.
Use your common sense. Never use the machine when tired, ill or under the influence
of alcohol, drugs or medicines that reduce alertness.
7) KEEP A SAFE DISTANCE FROM THE MACHINE
Keep people and animals away from the machine and your work area. Do not touch
electrically-powered parts.
8) PROTECT YOUR BODY
The use of the machine generates noise, heat, dust, smoke, vibrations, flying chips
and splinters. Always use personal protective equipment in accordance with the law
to prevent injury to the body, hands, eyes, hearing and respiratory tracts. Wear strong
clothing, with tight sleeves and cuffs, eye protection, working gloves, safety earmuffs,
dust masks and safety shoes. Do not wear loose clothing, scarves, ribbons and jewel-
lery that could be caught in moving parts of the machine. Wear a protective hairnet to
gather long hair. Normal glasses are not suitable for protecting your eyes.
9) EFFICIENCY OF THE MACHINE
Always check the efficiency and integrity of the machine; it could cause serious
accidents if in poor conditions. Do not use the machine if the switch does not allow
you to switch the machine on or off.
10) INTEGRITY OF THE MACHINE
Do not remove any components from the machine unless expressly indicated in these
instructions and do not modify the original configuration in any way.