Valet System One, Руководство пользователя

Страница: 8 / 16

7
SELECT CALLS
A Select Call directs communication to a particular station or group of stations within
the system with the exception of door stations.
If your system has been programmed for double digit format to allow for more than eight
Select Call channels, refer to section “Initiating a Select Call – Double Digit Format” below.
Initiating a Select Call - Single Digit Format:
Press and hold the selection number (1-8) on the dialing keypad
20
at the
master or any room station
The green light will turn on indicating your microphone is active
Commence your conversation then release the key to listen for a reply
The green light will turn off at the initiating station and will turn on at the receiving
station(s) enabling the person(s) receiving the call to reply
* Those replying to a call need not press any buttons. All replies are ‘hands free’
Continue the conversation by pressing the selected number
to talk and releasing
the selected number to listen
When the conversation is complete the system will reset after approximately
20 seconds from when the selected number was last released
or
the system
can be reset manually by pressing the ‘CANCEL / CLEAR’ key
3
Initiating a Select Call - Double Digit Format:
Press the first digit of the selection number (1-3) on the dialing keypad
20
at any room station
The red light will begin flashing
Press and hold the second digit of the selection number (1-8) on the dialing keypad
The green light will turn on indicating your microphone is active
Commence your conversation then release the second digit key to listen for a reply
The green light will turn off at the initiating station and will turn on at the receiving
station(s) enabling the person(s) receiving the call to reply
* Those replying to a call need not press any buttons. All replies are ‘hands free’
Continue the conversation by pressing the second digit
key to talk and releasing
the second digit key to listen
When the conversation is complete the system will reset after approximately
20 seconds from when the second digit key was last released
or
the system
can be reset manually by pressing the ‘CANCEL / CLEAR’ key
3