Valet System One, Руководство пользователя

Страница: 10 / 16

9
AUXILIARY/LOCK OUTPUT
Electronic door locks, Automatic gates, Courtesy lights, Alarm panic circuits, etc. can
be controlled from the master or any room station if optional auxiliary output boards
have been fitted to your system.
These outputs can be programmed to time out or toggle depending on the application.
To activate an output:
Press and release the ‘AUXILIARY OUTPUT’ key
18
at master or any room
station followed by the predetermined number on the ‘DIALLING KEYPAD’
20
for the device you wish to control
If the output is programmed to time out the device will de-activate or reset after a
predetermined period of time
If the output is programmed to toggle the output will remain on until the
‘AUXILIARY OUTPUT’ key
18
followed the predetermined number on the
‘DIALLING KEYPAD’
20
are pressed again
NOTE:
For this Optional feature to be available the fitting of Auxiliary output boards
and additional wiring are required at installation.
FUNCTIONS OF KEYS AND CONTROLS
Local Volume Controls
6
Adjustment of this control will set the speaker volume at the particular station for:
a) Music
b) Communication
c) Electronic Chime
Slide the control to the desired level
(Usual setting is about 3/4)
Auxiliary Input Jack - Type B
Optional accessory allowing an external audio device to be connected to the
intercom system where a master has not been incorporated.
Note:
A suitable connecting lead is required to connect the external audio device
to either of the input jacks above.