7
©
2005
Directed Electronics, Inc.
H1/15 YELLOW (+) Switched Ignition Input
Connect this wire to an ignition source. This input must show (+)12V with the key in run position
and during cranking. Make sure that this wire cannot be shorted to the chassis at any point. This
wire will trigger the system if the ignition is turned on before the unit is disarmed (doors unlocked
with the remote). It will also honk the vehicle’s horn and flash the parking lights (if connected).
H1/16 ORANGE (-) 500mA Ground-When Armed Output
This wire supplies a (-) 500mA ground as long as the system is armed. This output ceases as soon
as the system is disarmed.
Note: If using the H1/16 Orange wire to activate an add-on accessory such as window automation,
pager or voice module a 1-Amp diode must be installed to ensure proper operation. Insert the diode
as shown the the following diagram.
H1/17 BROWN/BLACK Unlock #87A Normally Closed
See H1/5.
H1/18 RED/WHITE channel 2, 200mA (-) output
When the system receives the transmitter code controlling Channel 2 for longer than 1.5 seconds,
the red/white wire will supply an output as long as the transmission continues. This is often used
to operate a trunk/hatch release or other relay-driven functions.
