![VALERII S&M GROUP PREMIUM-HD 0503EH2KW Скачать руководство пользователя страница 4](http://html.mh-extra.com/html/valerii-sandm-group/premium-hd-0503eh2kw/premium-hd-0503eh2kw_users-manual-and-operation-instruction_850914004.webp)
Проверил: Р.Ч./12.07.2016г.
5.7 Before off heater, please turn the thermostat to OFF position and turn the heating knob to Fan or off, let
the appliance cool down for two minutes.
5.8 Time-delay thermostat cut-off, if you forgot to turn the thermostat to OFF position before off
heater, Thermostat cut-off and Fan will be working when the temperature of front grill of heater is
near 45
℃
. When temperature reduced to about 40
℃
, the thermostat cut-off and fan will stopped
working itself. It will cool heater.
5.9 EY series heater can adjusted angle about 20
℃
according to you requirement by screw on two side
panel.
5.10 After using, turn off the heater firstly, pull out the plug.
6.
Cleaning and Maintenance.
6.1 Before cleaning the appliance, disconnect it from the socket and let it cool down. The enclosure is easily
to get dirty, wipe it often with soft sponge. For every dirty parts, wipe with a sponge dipped in
<
45
℃
water and mild detergent, then dry the heater enclosure with clean cloth. Be careful not to let the water enter
the appliance inner. Don’t splash water onto the heater, never use solvent like gasoline, isoamyl acetate
toluene etc. to clean the heater, in order to protect the enclosure.
6.2 Clean the cord and plug, dry and pack it in a plastic bag.
6.3 When you store the heater, let it cool down first, keep it dry. Then cover it with a plastic bag, put in a
packing box and store it in a dry, ventilated place.
7. Trouble shooting
You can solve many common problems easily, saving you the cost of a possible service call. Try the
suggestion below to see if you can solve the problem before calling the service center.
Problem
Possible cause
Treatment
The heater does not operate,
even when it is plugged in
and the switch, thermostat are
switched on.
The plug is loose, bad
connection,
Pull out the plug, check the
connection of the plug and socket.
Then connect again.
No power in socket outlet.
Insert the plug in a proper socket.
The heating element glowing
The input voltage is too high
or too low
Use proper supply according to the
rating on the label.
The air inlet grill is blocked
Keep the heater far away from
articles like curtain, plastic bag, paper
and other things which can cover the
inlet or can be easily cover on the air
inlet